Common Speaker Problems and How to Fix Them

You have invested heavily in acquiring the latest music system. And you must take care of it so that you can enjoy the best music-listening and movie-watching experience. But no matter how cheap or expensive your speaker system is, the speakers can develop problems through day-to-day use. They can have issues when you least expect it, like when hosting a party. You don’t have to call off the party or borrow your neighbor’s sound system; you can fix some speaker problems on your own. Here are common speaker problems and how you can fix them.

1. No Sound Coming from the Speakers

This is one of the main speaker problems. If you switch on the sound system, but no sound comes from the speakers, it can be a simple or complex issue. If the system was functioning properly the last time you used it, the issue could be a simple fix.

Solutions

If you can’t hear any sound from your speaker system, try the following quick fixes:

Ensure the system isn’t muted – Muted speakers never produce sound. You should check if the system is muted. If it’s muted, you just need to unmute it, and you will enjoy the sounds from the speakers. Additionally, ensure the audio source and receiver are unmuted. If they are muted, the speakers won’t produce any sound.

Check Volume Level – In some cases, the speakers and audio source volume may be zero. In such a scenario, the speakers won’t produce any sound. You just need to adjust the volume, and the speakers will start giving the best audio. If the speakers don’t work, proceed to the next step.

Check wire connection – If you just connected your speakers and they are not giving you any sound, the connection might be wrong. You may have connected the speakers to the wrong ports in the audio source. Just use the speaker manual to connect the speakers. Additionally, you can unplug the cables and clean the ports if necessary. Dust and dirt accumulating in connections can prevent the speakers from producing sound.

2. Audio Distortion

If your speakers are producing audio with sounds of fuzz, buzzing, or other feedback, that is a sign of distortion in your sound system. You can fix the issue on your own, but if it escalates, you should take the speaker system to a repair shop.

Solutions

Ensure it’s not your audio source device – Distortion issues can be from devices connected to the speakers. For instance, turntables can develop their own distortion problem. Therefore, you should listen to multiple devices to identify the cause of audio distortion.

Check cables and connections – If the audio distortion isn’t coming from the audio device, you should check cables and connections. Ensure cables go into the correct ports in the audio system. Also, if the speaker cables are old, you can replace them to get the best audio.

Check the speaker voice coil – Distortion can also be caused by a damaged speaker voice coil. You can plug a different speaker into the audio source using the same wires. If the sound quality improves, you can likely conclude that the speaker voice coil or cone is damaged.

Related: 10 Fixes to the Most Annoying Sound Issues on Computer

3. Blown speaker

Blown speakers produce weird sounds with fuzzy noise at loud levels and distortion at all levels. In some cases, blown speakers produce no sound. You can figure out the problem by paying attention to changes in voice and volume.

Solutions

Fix ripped cone – If the cone of your speaker is ripped or separated from the fabric around it, use silicone rubber gel to glue it back together. Silicone is used because it is flexible.

Check wiring – If you are not getting any sound from one of the speakers, check the wiring from the speaker to the amplifier. Also, tighten any loose connections. If this doesn’t help, probably your speaker voice coil is damaged.

4. No Bass or Treble

Bass and treble allow you to enjoy music from your sound system. However, if your system sounds thin or muffled, it could have bass or treble issues. There are various causes of this issue that can be fixed.

Solutions

Check speaker or stereo EQ settings – If the speaker or stereo EQ settings are improperly set, your system may have no bass or treble. Adjust the settings, and your speaker system will give you the entertainment you missed.

Ensure speakers are correctly placed – If the speakers are placed incorrectly in a room, like near the walls, that can cause excessive bass in sound.

Final Words

Your sound system is essential in your home. It provides entertainment, and you should learn how to fix common issues affecting the system to avoid inconveniences. The above information will help you fix some of the speaker issues. If the issues persist, take the speaker system to a repair shop.